1. Home

Bathroom Pop-Up Drain Installation

By

7 of 9

Put Drain Stopper Into Place
Pop-up stopper rod
Aaron Stickley
Push the stopper into the drain making sure the hole is facing the back of the sink. Once the stopper is in position move back under the sink to put the rod into place. Usually there is a plastic washer on each side of the plastic ball.

With the ball on the inside of the nut, thread the nut onto the drain pipe. Push the pop-up rod up and down from under the sink to see if the stopper goes up and down. If the pop-up is working properly you can tighten the nut hand tight. If the pop-up is not working reposition the stopper so it catches on the rod.

  1. About.com
  2. Home
  3. Plumbing
  4. Fixtures
  5. Bathroom Pop-Up Drain Installation- Step 7

©2014 About.com. All rights reserved.