1. Home
Send to a Friend via Email

Ice Maker Water Line


5 of 7

Connect The Tee Adapter
Connecting a water line tee adapter
Aaron Stickley
The tee adapter connects to the water stop valve (in this case a straight stop). The adapter size needs to fit your valve. Just make sure one of the outlets is 1/4" od for the ice maker line.

Attach the Adapt-A-Tee adapter to the angle stop and tighten by hand at first. Then finish tightening a little more with pliers, but make sure to use another pliers or wrench on the angle stop for support to make sure you do not move the angle stop while tightening.

  1. About.com
  2. Home
  3. Plumbing
  4. Appliances
  5. Ice Maker Water Line - Connect The Tee Adapter

©2014 About.com. All rights reserved.