How and Where to Use Pipe Dope at Home
Using Pipe Dope to Prevent Leaks in Plumbing Joints
If you're working on a plumbing project, you may be wondering how and where to use pipe dope. Pipe dope can be really effective when you need to stop a leak, for example. Plumbers also use these products to seal pipes. Any plumbing project involving the use of threaded pipe requires the use of a sealant in the form of pipe joint compound, plumber's tape (Teflon tape), or a combination.
What Is Pipe Dope?
Pipe joint compound, also known as pipe dope, is a type of sealant used with any threaded pipe to help create a seal. Consisting of a mixture of substances, including kaolin clay, vegetable oil, rosin, and ethanol, pipe joint compound serves as both a lubricant and a sealant for threaded joints. Using pipe joint compound on the threads of a pipe joint helps to ensure a water- and air-tight seal and it can stop a leak by filling in gaps in the threads.
How to Choose Plumbing Thread Sealants
Both pipe joint and Teflon plumber's tape are great for sealing threaded connections but there are some differences. Pipe dope can be better than Teflon tape for more permanent seals. Teflon tape is better than pipe dope if you will need to unseal the connection in the future. Pipe joint compound creates a strong seal and can be used for all types of pipe and fitting materials. It is used instead of Teflon tape for more permanent seals because it is stronger than plumber's tape.
Where Can Pipe Dope Be Used?
You can use pipe dope on the following:
- Black iron
- Brass
- Copper
- Galvanized steel
- Stainless steel
- Alumnium
Buying Pipe Joint Compound
Pipe joint compound is available in a tube or a canister with a brush applicator. The manufacturer's specifications are an important consideration when purchasing a sealant for your particular project. It is important to note if the product is intended for use on only one certain type of pipe, or if it is a universal product that can be used on both metal and plastic/PVC. When buying pipe joint compound, look for a product that can be used on all types of plastic and metal threaded pipe, and keep it on hand as part of your collection of basic plumbing tools and materials as the best way to seal a leaking pipe.
Warning
Some types of sealants are not appropriate for both water and gas. Plumber's tape, for example, comes in two types—one for use specifically on gas and one for water pipes. This can also be true for a pipe joint compound, so read the product usage specifications carefully, and if you are not comfortable sealing gas pipes, contact a professional immediately.
What You'll Need
Equipment / Tools
- Compressed air
- Wire brush
- Flat-head screwdriver
Materials
- Pipe joint compound
- Applicator
- Plumber's tape (optional)
- Rubbing alcohol
- Clean rags
Instructions
How to Use Pipe Dope
-
Clean the Threads
Before applying pipe joint compound and/or tape, clean the threads and remove dirt, oil, and scum. Metal threads can be fragile, so gently use a wire brush or compressed air to clean out the gunk.
For PVC threads, try scraping gunk out with a small flat-head screwdriver and some rubbing alcohol on a rag to cut through any residue. Dry thoroughly.
-
Coat Evenly
To use pipe joint compound, apply an even coating onto the end threads of the male pipe (the end that will go into the other pipe), using either the applicator brush or a finger. Do not smear the compound inside the pipes. Apply pipe dope horizontally in the same direction as the threads rather than vertically to ensure it fills each thread.
-
Thread Pipes
Then, thread the pipe into the fitting. Make sure to avoid cross-threading that might damage the threads.
Many plumbers use a thin layer of pipe joint compound on top of plumber's tape for a great seal on almost any threaded joints involving water.
Warning
Do not overturn or overly tighten the joints. Tighten joints with a wrench or fingers (depending on the size), and then add one or two more smooth turns. Then resist the urge to turn them "just one more time" or you'll run the risk of damaging the threads or expanding the fitting, which disrupts the seal.
-
Wipe Away Extra Compound
Use a clean rag to wipe away excess compound from the joints. No drying time is necessary.
How to Remove Pipe Dope
You may need to remove old pipe dope on a plumbing pipe before installing a new pipe joint. To remove pipe dope, hold a rag around the threaded end of the removed section of pipe. Turn counterclockwise until the compound is removed. You can repeat until all is removed and then brush with a steel brush to remove any excess.
When to Call a Professional
If you used pipe joint compound products but there's still a leak or you accidentally cross-threaded the pipes, do not layer on the material to try to stop the problem. Instead, it's best to call in a professional plumber to fix or replace the problem area. In addition, if the threads are too dirty to clean, pipe joint compound will not work, and a professional will need to assess the problem.
-
Is pipe dope better than Teflon?
Yes, pipe dope is stronger than Teflon tape and is used more often by professionals.
-
Is pipe dope a permanent seal?
Pipe dope creates a stronger seal than Teflon tape, for example, but it is not permanent. Pipe dope can be removed.
-
Is pipe dope the same as plumber's putty?
No, pipe dope and plumber's putty are different things. Plumber's putty is not used for threaded pipes. Plumber's putty is used to create a resilient waterproof seal between two rigid surfaces, such as a sink and faucet, between a sink strainer and sink, or between a sink and a drain, for example.